This Section Contains: Micrometers • Calipers • Gage Blocks • Bore Gages • Hole Mikes • Microscopes


"Value-Cal" Dial Calipers

Fowler Dial Calipers have been designed to meet the standards of a high precision measuring tool at a price that makes it affordable to caliper users. The tools are exceptional in design and manufacturing quality standards. The smooth action, feel, balance and finish ensures their popularity with its users. In addition to handling all conventional dial caliper applications, this series has the extra "4-way" jaw design feature. This design allows the following measurements with no other tools or steps needed. All measurements read directly from the dial.

  • Conventional outside measurements
  • Step jaw for step base measurements
  • Inside jaws for inside measurements
  • Depth rod for depth measurements
  • Fast action thumb roller device for rapid travel and ultra smooth settings
  • Graduation = .001" (.05mm)
  • Accuracy = .001 (.050

Available in sizes from 6-12" (150-200mm)


"One-Rev" Dial Calipers

New color dial faces on Fowler's "One-Rev" Dial Calipers, combines the convenience of widely spaced microfine graduations, the protection of a covered depth rod and the accuracy of a hardened stainless steel rack. Dial hand completes one revolution per each .100". Inverted covered rack prevents dirt accumulation in rack gear teeth. Self contained movement eliminated gear misalignment.

  • Thumb roll for rapid setting.
  • Accuracy = .001" per 6"
  • Graduation = .001"
  • Four way jaw for outside, inside, depth and step measurements.

Available in sizes from 6-12"


Inch / Metric Combination Dial Caliper

For Fowler accuracy and reliability in an inch and metric reading dial caliper. Hardened stainless steel used through out. Four way jaw for outside, inside, depth and step measurements.

Available in sizes from 6-12" (150-300mm)

Ultra-Cal III Digital Calipers

Sylvac's Ultra-Cal III caliper represents the latest innovation in electronic measuring instruments. Designed and built by Sylvac of Switzerland, this gage uses a totally new, high accuracy capacitive sensor. This patented technology will lead the way toward an entire family of measuring products – all at a reasonable price.

  • Resolution = .0005" (.01mm)
  • Respectability = .0005" (.01mm)
  • Temperature range = 5 - 40°C
  • Working / storage -20 to 60°C
  • Direct inch / metric conversion.
  • Fast tracking speed
  • Large, high contrast LCD display
  • Direct RS-232C output allows connection to any computer or printer without an interface

Available in sizes from 6-12" (150-300mm)
5 Year Warranty


Ultra Cal IV Caliper

Coolant, Water & Oil Resistant

Introducing Fowler / Sylvac's new electronic water and oil resistant caliper with Sylvac's patented inductive measuring system.

  • Resolution = .0005" (.01mm)
  • Respectability = .0005" (.01mm)
  • Direct RS-232C output allows connection with any computer or printer without an interface
  • Large easy to read LCD display
  • Direct inch / metric conversion
  • Battery life: 3000 hours continuous
  • Four-way jaw for outside, inside, depth and step measurements
  • Made from hardened stainless steel

Available in sizes from 6-12" (150-300mm)
5 Year Warranty


Rod-Anvil Max-Cals

The Rod-Anvil Max-Cal is ideal for measuring wall thickness of pipes, tubing, etc. with ease and accuracy. The pin-like outside jaw is designed to reach deep into many otherwise in accessible places. All Max-Cal Calipers offer the same features found in our standard max-cal Caliper including output, LCD Readout, True inch / metric conversion, etc.

  • 2-way measuring (outside and depth)
  • Length of outside jaw = 1.18" (30mm)
  • Diameter of Rod Jaw = .12 (3mm)
  • Resolution = .0005" (.01mm)
  • Size range = 0-6" (0-150mm)


ProMax Electronic Caliper

 ProMax-Cal electronic calipers, recently introduced by Fowler, include all the fine features of Ultra-Cal lll including Sylvac's new patented, high accuracy capacitive sensor and the addition of a thumb wheel.
  • Resolution = .0005" (.01mm)
  • Respectability = .0005" (.01mm)
  • Temperature range = 5 - 40°C
  • Working / storage -20 to 60°C
  • Direct inch / metric conversion.
  • Fast tracking speed
  • Large, high contrast LCD display
  • Direct RS-232C output allows connection to any computer or printer without and interface

Available in sizes from 6-8" (150-200mm)


Euro-Cal lll

Designed by Sylvac of Switzerland, these gages use a totally new, high accuracy capacitive sensor with an economical frame.
  • Resolution = .0005" (.01mm)
  • Respectability = .0005" (.01mm)
  • Temperature range = 5 - 40°C
  • Working / storage -20 to 60°C
  • Direct inch / metric conversion.
  • Fast tracking speed
  • Large, high contrast LCD display
  • Direct RS-232C output allows connection to any computer or printer without and interface

Available in sizes from 6-12" (150-300mm)
Gage Blocks