|
Die Scope MS/1
Detailed
View
|
The MS/1 is
an affordable, easy way to visually inspect a die for cracks and
wear or check geometry and surface finishes. The included die
stand rotates, pivots, and locks the die in place for easy viewing
and can accommodate standard sizes: 1", 1 1/8", 1 1/2",
and 2". Custom sizes are also available. Each stereo Diescope
is equipped with a 10X eyepiece, top and bottom lights, and a
die stand. Three models are available to choose specific magnifications.
- Model 1
- 10X & 20X magnification.
- Model 2
- 20X & 40X magnification.
- Model 3
- 10X & 30X magnification.
Other eyepieces
available
|
|
Die Scope MS/2
Detailed
View
|
The MS2 is
a high quality zoom diescope designed to view a wide range of
die sizes and surface conditions. The included die stand rotates,
pivots and locks the die in place for easy viewing and can accommodate
standard sizes 1", 1 1/8", 1 1/2" and 2".
Custom sizes are also available.
Features:
- Zoom range
.75X - 3.5X
- Fluorescent
ring illuminator provides uniform shadow free light.
- Standard
10X eyepieces with optional 15X, 20X eyepieces and 2X doubler
for additional magnification.
|
|
Small Hole Gage Sets
Complete
List of small hole gage sets.
|
Features:
- Available
Brands:
Value Brand, PEC Tools, Brown & Sharpe, Fowler, Starret
&
Mitutoyo.
- Gaging
surface is a fell-round with a flat bottom;
permits use in smallest of shallow holes, slots, grooves, etc.
- Knurled
knob at end of handle is used for size adjustment.
- Sets supplied
with case.
- Hole size
is obtained by measuring over the contact points with a micrometer.
- Gaging
surface is fully hardened to insure long tool life.
- Extra long
for gaging deep & shallow holes, slots & similar work.
|
|
Telescoping Gage Sets
Complete
List of telescoping gage sets.
|
Features:
- Available
Brands:
Value Brand, PEC Tools, Brown & Sharpe, Fowler, Starret
&
Mitutoyo.
- Gaging
surface is a full-round with a flat bottom;
permits use in smallest of shallow holes, slots, grooves, etc.
- Knurled
knob at end of handle is used for size adjustment.
- Sets supplied
with case.
- Hole size
is obtained by measuring over the contact points with a micrometer.
- Gaging
surface is fully hardened to insure long tool life.
- Extra long
for gaging deep & shallow holes, slots & similar work.
|
|
